Ryobi RLT26SDNB Manual De Utilización página 3

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NaME
Safety Alert Symbol
Read Your Operator's
Manual
Wear eye and hearing
protection
Keep bystanders away
Ricochet
No blade
RPM Decal
Boots
Gloves
No Smoking
Petrol
Oil
Mix Petrol and Oil
Switch
GB
E
English
E
GB
SYMBOLS
EXPLaNaTION
Indicates danger, warning or caution. It means attention!!! Your safety is
involved.
Your manual contains special messages to bring attention to potential
safety concerns as well as operating and servicing information. Please
read all the information carefully to ensure satisfaction and safe use.
Wear eye and hearing protection when operating this equipment.
Keep all bystanders at least 15m away.
Danger of Ricochet.
Do not install any type of blade on this unit.
Rotational direction and maximum speed of the shaft for the cutting
attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded petrol intended for motor vehicle use with an octane
rating of 87 ([R+M]/2) or higher.
Use synthetic 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
On/Off Switch
I = ON to Run
O = OFF to Stop
3