Ryobi RLT26SDNB Manual De Utilización página 5

Make sure all guards, straps, deflectors and handles
n
are properly and securely attached.
Use only the manufacturer's replacement line in the
n
cutting head. Do not use any other cutting attachment.
Never operate unit without the safety guard in place
n
and in good condition.
Weight
- Without fuel and string head
- Without fuel with string head
Fuel tank volume
Cutting swath
Engine displacement
Line diameter
Maximum engine performance
(in accordance with ISO 8893)
Maximum rotational frequency
of the the spindle
Engine speed (rotational frequency)
at recommended max. spindle
rotational frequency
Engine speed (rotational frequency)
at idle
Fuel consumption (in accordance
with ISO 8893) at max. engine performance [kg/h or (L/h)]
Specific fuel consumption
(in accordance with ISO 8893)
at max. engine performance
DESCRIPTION
1. Primer Bulb
2. Choke Lever
3. Fuel Cap
4. Starter Grip
5. On / Off Switch
6. Throttle Trigger
7. Rear Handle
8. Front Handle
9. Shaft
10. Safety Guard
11. Bump Head
12. Cutting Line
13. Idle Speed Screw
GB
English
E
GB
n
SPECIFICaTION
(kg)
[cm or (L)]
3
(mm)
(cm / cc)
3
(mm)
(kW)
(min- 1 )
(min- 1 )
(min- 1 )
[g/kW.h or (L/kW.h)]
aSSEMBLY
Please refer to Fig. 2.
5
E
Maintain a firm grip on both handles while trimming.
Keep bump head below waist level. Never cut with
the bump head located over 76 cm or more above the
ground.
RLT26SDNB
250 or (0.25)
2,800-3,800
0.33 or (0.45)
508 or (0.7)
WaRNING
If any parts are damaged or missing, do not
operate this tool until the parts are replaced.
Failure to heed this warning could result in
serious personal injury.
WaRNING
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WaRNING
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug when
assembling parts.
3.75
3.90
432
26
2.4
0.65
10,000
12,000