Freeman PE2118G Manual Del Usuario página 2

SYMBOLS
GENERAL SAFETY INSTRUCTIONS
UNPACKING
SPECIFICATIONS
FEATURES
OPERATION
USING BELT HOOK
LOADING FASTENERS
UNLOADING FASTENERS
DEPTH OF DRIVE
SETTING TOOL FIRING SETTINGS
WORK CONTACT ELEMENT
NO-MAR PAD
REMOVING BATTERY
CLEARING JAMS
CHARGING BATTERY
CHARGING A HOT BATTERY PACK
BATTERIES
BATTERY PACK REMOVAL AND RECYCLING
MAINTENANCE
TROUBLESHOOTING
WEARABLE PARTS
WARRANTIES
WARNING
The warnings and precautions discussed in this manual cannot cover all possible conditions and
situations that may occur. Please be aware of the potential hazards, and take all necessary precau-
tions to avoid risk of injuries.
SAVE THIS MANUAL
To avoid serious personal injury, do not attempt to use this product until you read the manual
thoroughly and understand it completely. Save this manual and review frequently for safe operation
and instructing others who may use this tool. Keep this manual for the safety warnings, precautions,
operations, inspections and maintenance information. Store this manual and the receipt in a safe and
dry place for future reference.
02
HTTP://WWW.FREEMANTOOLS.COM
MODEL: PE2118G
3
3 - 5
6
6
6
6 - 11
6
7
8
8
8 - 9
9
9
9
10
10
11
11
11
11
12 - 13
13
14
1-888-669-5672
MODEL: PE2118G
SYMBOLS
In this manual, on the labels, packages and all other information provided with this tool, the following signal
words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS
SIGNAL MEANING
Indicates a potentially hazardous situation, which, if not avoided,
WARNING:
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
CAUTION:
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
CAUTION:
property damage.
GENERAL SAFETY
INSTRUCTIONS
CALIFORNIA PROPOSITION 65
WARNING:
The product contains chemicals known
to the State of California to cause cancer
and birth defects or other reproductive
harm. The dust created while using this
tool could also contain chemicals known
to the State of California to cause cancer,
birth defects or other reproductive harm.
Wash hands after handling.
WORK AREA
Keep the work area clean and well lit. Cluttered
benches and dark areas increase the risk of
accidents.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. The tool could
create a spark which may ignite flammable liquids,
gases or dust.
Keep bystanders, children, and others away
while operating the tool. Distractions could result
in improper use and cause injury.
Keep proper footing and balance at all times.
Proper footing and balance enables better control
of the tool in unexpected situations.
Do not use on a ladder or unstable supports.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
PERSONAL SAFETY
Always wear eye protection. Operator and others
in the work area should always wear ANSI-Z87.1
approved safety goggles with side shields. Eye
protection is used to guard against flying debris,
which may cause severe eye injury.
HTTP://WWW.FREEMANTOOLS.COM
Always wear ANSI S3.19 approved hearing
protection when using the tool. Prolonged
exposure to high intensity noise may cause hearing
loss.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing, and gloves away
from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
Stay alert. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool may
cause serious injury.
Avoid prolonged use. The tool's repetitive motion
and vibration can cause harm to your hands or
arms. The user can use gloves for extra cushion,
take frequent breaks and limit daily use to prevent
this issue.
This tool vibrates with use. Continuous
operation can be harmful to your hands and
arms. Stop using the tool if you feel tingling or pain.
Resume work after recovery. Seek medical advice
if serious symptoms occur.
Make sure there are no hidden electrical cables,
gas pipes, etc. while working on the work piece.
These hazards could harm the user if damaged
while using this tool.
Never place hands or any other body parts in
the fastener discharge area of the tool. The tool
might eject a fastener and could result in death
or serious personal injury.
For overhead work, wear a safety helmet.
Wash hands after handling this product or its
power cord. They may contain chemicals
known to the State of California to cause cancer
and birth defects or other reproductive harm.
ELECTRICAL SAFETY
The chargers power plug must match the
outlet. Never modify the plug or plug the tool into
outlets that do not match the plug.
Avoid contact with grounded elements such as
metal tables, pipes, ranges or refrigerators.
Contact with these elements can put you at risk of
electrical shock.
1-888-669-5672
03