Loading Fasteners - Freeman PE2118G Manual Del Usuario

UNPACKING
This tool has been shipped completely assembled.
Carefully remove the tool and any accessories from
the box.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-888-669-5672.
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result in
serious personal injury.
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such alteration
or modification is misuse and could
result in hazardous conditions leading to
possible serious personal injury.
SPECIFICATIONS
BATTERY CHARGE 120V, 60Hz
INPUT VOLTAGE 18V DC, 36Wh
FIRING SPEED
30 nails/staples per minute
MAGAZINE CAPACITY 100 nails/staples
SHOTS PER CHARGE 400
CHARGE TIME 45 min
WEIGHT 6.17 lbs
18 GA Brad Nails & 18 GA
FASTENER TYPE
1/4" Narrow Crown Staples
Nails: 3/4" - 2"
FASTENER LENGTH
Staples: 3/4" - 1 5/8"
FEATURES
HIGH POWER TECHNOLOGY
Provides fast firing speeds
ERGONOMIC HANDLE
For comfortable use and decreased slipping
06
HTTP://WWW.FREEMANTOOLS.COM
MODEL: PE2118G
LED LIGHT INDICATOR
To warn user of nail jams, low battery, and empty
magazine
LED WORKING LIGHT
Helps to illuminate the working surface
EASY ACCESS NOSE
For clearing jams
DEPTH ADJUSTMENT WHEEL
To control driving depth of fastener
SELECT FIRE SWITCH
For quick selection of bump/single firing mode
BELT HOOK
LITHIUM ION BATTERY
OPERATION
USING BELT HOOK
1. Use a screw driver to loosen the belt hook bolt by
rotating the bolt in a counter clockwise direction.
2. Rotate the belt hook to the desired position.
3. Use the screw driver to tighten the belt hook bolt
and lock the belt hook into position.
Belt Hook Bolt
Belt Hook
1-888-669-5672
MODEL: PE2118G

LOADING FASTENERS

1.
Push down on the latch button(A). Pull back on the
magazine cover(B).
2.
Insert a stick of fasteners into the magazine rail(C).
For brad nails, the pointed ends of the fasteners
are resting on the bottom edge of the magazine
when loading.
For staples, the head of the staples are resting
on the top of the magazine.
3. Push the magazine cover(B) forward until the latch
button pops up.
Latch Button(A)
Magazine Cover(B)
HTTP://WWW.FREEMANTOOLS.COM
Magazine Cover(B)
WARNING:
The tool may fire when it is first connect-
ed to the power source. Always discon-
nect the tool to the power source before
loading fasteners to prevent injury from
unintended cycling. Always make sure
the tool's magazine is empty at the
beginning of each work session, before
connecting to the power source.
WARNING:
Only use fasteners that are recommend-
ed for use with this tool by the manufac-
turer. Fasteners not identified for use
with this tool by the tool's manufacturer
could result in a risk to persons or tool
damage when used in this tool.
WARNING:
Keep the tool pointed away from
yourself and others when loading fasten-
ers. Failure to do so could result in
serious personal injury.
WARNING:
Never load fasteners with the workpiece
contact or trigger activated. Doing so
could result in possible serious personal
injury.
07
1-888-669-5672