Programming The Controller; Set Current Time And Date; Select The Program; Set Station Run Time - Toro TMC-424 Manual Del Usario

Programming the Controller

Note: English display prompts and 12-hour (a.m./p.m.) time format are default
control module interface settings. To select Spanish, French, Italian or German
as the display language, and/or a 24-hour time format, refer to the Special
Functions information page 9.

Set Current Time and Date

1. Turn the Function Dial clockwise to the Set Time/Day
digits will begin flashing.
2. Adjust the display by pressing the
Note: Hold either button down for rapid advance.
3. Press the button to advance to the next field.
4. Repeat steps 2 and 3 to set the current minutes, year, month and day
(current weekday will be temporarily shown).
5. Return the Function Dial to the RUN

Select the Program

To simplify the programming process, the following procedure is provided to set
up one watering program at a time.
Note: If the controller has been previously programmed, the user-defined memory
can be quickly erased if desired. Refer to "Program Memory Erase" on page 10.
1. Set the Program Switch to select Program A, B, C, or D.

Set Station Run Time

Note: A station is assigned to the selected program when it is given a run time
duration. The station can have only one run time assigned per program, but can
have a different run time assigned in each remaining program. The run time is set
in minutes and hours by default but can be set in seconds, minutes and hours.
See "Station Run Time Display Format" on page 11 to select this option.
1. Turn the Function Dial to the Set Station Run Times
2. Press the or
Note: Each station number (1 to 4 or 1 to 8) will be displayed in the box
corresponding to the module installed in each bay (I, II and III).
3. Press the or
Off (– – –) to 8 hours (in 1-minute increments) or 1 to 59 seconds
(if the option is selected).
Note: Hold either button down for rapid advance.
4. Repeat steps 2 and 3 for all stations to be assigned to the selected program.
6
buttons to select the station number.
buttons to adjust the station run time from
or buttons.
position when finished.
position. The hour
position.