Locating Battery Charger; Battery Specs - NOCO Genius Gen Serie Guía De Usuario

compatible voltages.
• If using an extension cord, always connect to the battery
charger first, before connecting to an electrical outlet. When
disconnecting, always disconnect from the electrical outlet first.
Make sure the electrical outlet is a 120VAC GFCI (Ground Fault
Circuit Interrupt) outlet.

LOCATING BATTERY CHARGER

• Locate the battery charger as far away from the battery as
possible.
• Never place the battery charger directly above the battery; gases
from battery will corrode and damage battery charger.
• When reading electrolyte specific gravity or filing battery, never
allow battery acid to come in contact with the battery charger.
• Do not operate the battery charger in a closed-in area or an area
with restricted ventilation.
• Do not set a battery on top of battery charger.

BATTERY SPECS

The following recommendations should ONLY be considered as
guidelines. Always refer to the battery manufacturer's recommendations
for battery charging. The GEN Series On-Board Battery Chargers are
suitable for charging all types of 12V lead-acid batteries, including
Wet (Flooded), Gel, MF (Maintenance-Free) and AGM (Absorption
Glass Mat) batteries. The GEN Series On-Board Battery Chargers can
be used on battery sizes from 25 to 230Ah, but can also maintain all
battery sizes.
6