Workpiece Stop - Allmatic TeleCentric 70 K Manual De Instrucciones

8 | Clamping
8.2.4

Workpiece Stop

1
1
Fig. 14: Workpiece stop
The workpiece stop can be mounted at the intended points either magnetically or with a screw.
The clearance to the stop is adjusted with the spacer (1). The same clamping position can be
repeated with the workpiece stop.
Article numbers
692 152 5650 131
692 152 5650 031
64 / 400
Magnetic workpiece stop with spacer
Mechanical workpiece stop with spacer
ALLMATIC
TeleCentric