Passing Through The Signals; Digital/Analog Audio Converter; Convert Toslink Or Coaxial (Spdif) To Rca; Care, Maintenance, Storage And Transport - ClickTronic 60834 Manual De Instrucciones

uSer'S MAnuAl
4.1.3

passing through the signals

Pass through the original signal optionally
by expanding one of the previous connec-
tion options from 4.1.1 or 4.1.2 by connecting
another output device on each unused
output.
4.2 digital/Analog Audio
converter
4.2.1 Convert Toslink or Coaxial
(SpdIF) to rCA
TOS/COAX
1. Connect a Coaxial cable to the input of
the Digital/Analog Audio Converter
and to your source device.
2. Connect a toslink cable to the output of
the Digital/Analog Audio Converter
and to your output device.
3. Connect the included power supply unit
to the Digital/Analog Audio Converter
and then to a mains socket.
The Digital/Analog Audio Converter is ready
to use, when the Operation LED shines.
4. Set the switch to „Coaxial".
5. Switch on all connected devices.
20
CliCktroniC
®
5 Care, maintenance,
Storage and Transport
risk of life by electric shock
>> Disconnect all devices from mains.
>> Do not clean wet or moistly.
>> Do not touch voltage carrying parts.
material damage by aggressive
detergents
• Devices surface may discolor.
>> DO nOt use detergents.
• the device is maintenance-free.
• use a dry and soft cloth to clean your
product. B e careful to avoid scratches.
• Avoid extreme conditions, such as
extreme heat, cold, humidity or direct ex-
posure to the sun, as well as vibrations and
mechanical pressure.
• Keep the product away from children
and store it at dry and dust-proof places!
• Keep the original packing for transport
and to avoid damages.
6

Specifications

model 60834
toslink,
inputs
Coaxial
toslink,
Outputs
Coaxial
DC input 5V
Mono, Ste-
Audio
reo, Dolby
formats
5.1
CliCktroniC
®
uSer'S MAnuAl
60835
toslink,
Coaxial
Cinch
, 600mA
Mono,
Stereo
21