INTRODUCTION
Product Description
INTRODUCTION
Product Description
This submersible pump is for use in basins or lift stations and is suitable for pumping clear water. Do not use
the pump in applications where effluent (gray water), sewage, or any other debris (gravel, sand, floating
debris, etc.), abrasives, or corrosives are present. Both automatic and manual versions of these pumps are
available.
These products have been carefully tested, inspected, and packaged to ensure safe delivery and operation.
Please examine your pump carefully to ensure that no damage occurred during shipment. If damage has
occurred, please contact the place of purchase. They will assist you in replacement or repair, if required.
The pump motor is equipped with an automatic resetting thermal protector, and may restart unexpectedly.
Thermal Protector tripping is an indication of motor overloading or overheating, which can be caused by
application issues such as an obstructed pump impeller, switch stuck in the ON position, pump running dry,
pump air-locked, pump short cycling, excessively high or low voltage supply, or possibly a pump, motor,
bearings, or seal that have reached the end of their useful life.
Models
Model
HP
6-CIA
1/3
6-CIM
1/3
6-CIM-R
1/3
6-CIM-RS
1/3
6-CIA-RFS
1/3
8-CIA
4/10
8-CBA
4/10
8-CIM
4/10
8-CBM
4/10
*
Pumps are not dual voltage.
Manual pumps can be converted to Automatic mode by installing a separate liquid level control, such as an
RS-5 Remote Switch kit.
Flow Rates
At Height: (Head)
6 Series
8 Series
4
PSI
Voltage
7.8
115 or 230*
7.8
115 or 230*
7.8
115
7.8
115
7.8
115
9.9
115
9.9
115
9.9
115
9.9
115
Gallons/Liters per Minute
5 ft
10 ft
1.5 m
3 m
46 / 174
29 / 110
54 / 204
42 / 159
Pump Activation Method
Automatic with Diaphragm Switch
Manual
Manual
Automatic with Remote Diaphragm Switch
Automatic with Remote Float Switch
Automatic with Diaphragm Switch
Automatic with Diaphragm Switch
Manual
Manual
15 ft
Shut Off
4.5 m
12.5 / 47.3
18 ft/5.5 m
26 / 98
22.9 ft/7 m