Introduction; Included In The Delivery With The Instrument; Operating; Switching On - Vetus SENSORD Manual De Manejo Y Instrucciones De Instalación

1

Introduction

This manual gives information about the
use, installation and setting of the tank
manager.
The tank manager consists of a display
instrument and an ultrasonic level sensor
for each tank.
A maximum of 8 sensors for 8 different
tanks can be connected to each instru-
ment.
The volume of liquid in a maximum of 4
different tanks can be displayed on the
instrument simultaneously, in litres, Impe-
rial Gallons or US Gallons according to
choice.
The sensors required must be purchased
separately (Art. code: SENSORB).
Read the instructions supplied with each
sensor before installing the sensors.
1.1 Included in the delivery
- 1 display instrument
- 1 8-pin female socket
- 1 UTP network cable (5 metres)
- 1 UTP splitter
- Assembly seal
- 4 metal rings + M4 nuts
- Drilling template
- Installation instructions
Ultrasonic tank management system
2

Operating

2.1

Switching on

Switch on the instrument using an external
switch (there is no ON/OFF switch on the
instrument).
A welcome screen is displayed briefly after
switching on.
vetus
Tank level display
The contents of the tank or tanks will be
displayed after this.
80
L
Vetus
ENGLISH
1690
L
Vetus
27
090430.01