Publicidad
Idiomas disponibles
Idiomas disponibles
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR
SNOW THROWER.
Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Traction Drive Lever
Auger Drive Lever _,
Gas Tank
Primer
Button
Choke
Crank Assembly
Control
Chute Deflector
Discharge
Chute
Ignition
Key
Recoil
Starter
Handle
Height Adjust Skid _--
[r Pin
Scraper Bar
Figure 13
Auger Drive Lever - Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever
- Selects t_e
speed of t_e snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly
- Changes the direc-
tion of snow throwing through the dis-
charge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge
Chute - Changes the height
and direction t_e snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine.
F-031027L
12
Recoil Starter Handle - Starts the en-
gine manually.
Choke Control - Used to start a cold
engine.
Primer Button
- Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Throttle Control
- Controls the engine
speed.
Electric Start Button - (if so equipped)
Usedto start the engine using the 120 V elec-
tric starter.
Shear Pin - Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the auger hous-
ing.
Toolbox
- spare shear pins and
spacers are located in toolbox.
Publicidad
