Installation And Connection - Bartscher Economic Manual De Instrucciones

•
Do not move or tilt the device when in operation.
•
Never leave the device unattended when in operation.
•
Never touch the plug with wet or moist hands.
•
Never operate the device with moist hands or while standing on wet floor.
•
The device is powered until it is disconnected from the supply system.
•
In case of fire remove the plug from the socket or disconnect the device from the
power supply before the fire extinguishing activities. Caution: Do not sprinkle the
device with water while it is still powered: Electric shock hazard!

5.2 Installation and connection

•
Unpack the device and dispose of all packaging material.
•
Put the device on a level, stable, clean and dry surface, resistant to high
temperature.
•
The device must be positioned in such way that it is protected from sprinkled water and
in appropriate distance from the edges of the operational surface.
•
Never put the device on a flammable surface.
•
Never place the device in humid or wet environment.
•
Do not place the device near open fireplaces, electric ovens, heating ovens or other
heat sources.
•
Ensure the device is not placed near any flammable materials. Fire hazard!
•
Ensure a safe distance is maintained from all walls, shelves, etc. for proper
circulation of warm air emitted by the device.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
- 21 -