RISCO Group VUpoint RVCM11W Guia De Instalacion página 19

3. Define the following fields in the Add Trigger dialog box:
Field Description
Label Enter a name for the camera trigger
Camera
Choose a camera from the list
Event Type Choose an event type from the list
Event Choose the event from the list, e.g.
alarm, duress, etc.
Additional fields are displayed in the Add Trigger dialog box according to the
event type that you selected (see examples below for Partition and Detector event
types).
Figure 18 Add Partition Event Trigger
4. Define the following fields in the Add Trigger dialog box according to the
event type that you selected.
Field Description
Partition(s) Select the partition(s) from the list.
NOTE – Only partitions associated with
the camera are displayed.
Detectors Select the detector from the list
5. Define the following image (still) and clip (video) definitions:
Field Description
Images Pre-event starting time (sec) – time, before the actual event occurred, to
(still) start displaying still images.
Number of images – number of still images to display.
Interval between images (sec) – time required between each still image.
Event Type
Partition and Detector events
Partition and Detector events
Partition and Detector events
Partition and Detector events
Figure 19 Add Detector Event Trigger
Event Type
Partition events only
Detector events only
17