RISCO Group VUpoint RVCM11W Guia De Instalacion página 22

Connecting to a Local Network Video Recorder (NVR)
The installer can connect the IP Camera to a local NVR. The installer must
determine the IP Address of the IP Camera and configure it as an ONVIF camera
in the NVR. In addition, the installer must enter the IP Camera's credentials.
By Default, the Username and Password for the IP Camera login is "admin" and
"AdmiN_+ IP Camera MAC address" (for example, AdmiN_AABBCCDDEEFF).
The same credentials are used for the ONVIF camera.
The installer can now also access the live stream from the IP Camera.
NOTE:
Changes performed on the default IP Camera settings are at the responsibility of
.
the installer
20