tormatic DTS T1E Instrucciones Para La Instalación página 8

Safety recommendations
• The manufacturer's instructions must be strictly observed.
• The installer must check the installation and the correct functioning of the device.
• The product must not be used incorrectly or for purposes other than those envisa-
ged.
• Do not tamper with or modify the product in any way.
• Always use original spare parts.
• Cordon off the working area to prevent the access to unauthorised people.
• Ensure that the working area is clear of obstacles and the fl oor is not slippery.
• All equipment used must be in good working condition.
• Do not work in environments not suffi ciently lit or unsafe.
• Keep unauthorised people clear of the intervention area.
• Do not leave the intervention area unattended.
Purpose of the manual
This manual has been drawn up by the manufacturer and is integral part of the pro-
duct.
The information contained herein is addressed to expert operators charged with the
installation and the extraordinary maintenance. These operators must have specifi c
knowledge and must be able to perform all of the interventions in a correct and safe way.
The strict observance of these instructions grants safe conditions, an effi cient operation
and a long life of the product. To prevent operations that can result in accidents, read
this manual thoroughly and obey its instructions.
Application fi eld
TORMATIC hydraulic operators 230 VAC to automate swing gates.
TORMATIC electromechanical operators 230 VAC combined with SAFETY CARD to
automate swing gates.
Contents
1. DESCRIPTION
1.1 Block diagram of the device ...........................................................4
1.2 Technical data ................................................................................4
2. INSTALLATION
2.1 Preparation .....................................................................................5
2.2 Assembly ........................................................................................5
2.3 Electrical connections ....................................................................5
3 OPERATION
3.1 Functioning tests ............................................................................5
3.2 Trimmer adjustment .......................................................................5
3.3 Operation programming .................................................................5
4. FUNCTIONING CHECK
4.1 Functioning check of external devices ...........................................6
5. ACCESSORIES
5.1 Safety card .....................................................................................6
5.2 Coded keypad ...............................................................................6
5.3 Badge reader ................................................................................6