Installed Software; Operating System; Additional Software - R&S ETC Compact Manual De Instrucciones

R&S ETC
7

Installed Software

The firmware and the operating system are already installed on the R&S ETC.
For further information:
● Performing a firmware update: see the release notes.
● Installing software options: see the user manual.
7.1

Operating System

The R&S ETC is equipped with the Windows CE 5.0 operating system.
When the R&S ETC is delivered, the operating system is configured for optimum
operation. Changes to the system settings are required only if you configure the network
and the settings do not conform to the default settings.
Risk of causing instrument unusability
To prevent malfunctions and to avoid instrument repair, only install service packs
approved by Rohde & Schwarz.
7.2

Additional Software

Risk of causing instrument unusability
The R&S ETC is equipped with the Windows CE 5.0 operating system. The use
and installation of additional software may impair instrument function. Thus, run
only programs that Rohde & Schwarz has tested for compatibility with the
R&S ETC software.
The programs used on the R&S ETC under Windows CE 5.0 have been adapted
to the R&S ETC. Existing R&S ETC software must always be modified using only
update software released by Rohde & Schwarz.
Getting Started 2116.7884.02 - 04.00
Installed Software
43