Respirator Setup And Use - Standard Configuration - NIOSH RPB T-LINK Manual De Instrucciones

SETUP AND USE
PLACING THE HELMET INTO THE HOOD
FIGURE 2.1
Insert the Helmet into the hood with front of
the Helmet towards the lens of the hood.
1.
Do the same thing on the other side to fully
secure the lens and the hood to the Helmet.
2.
FIGURE 2.3
FIGURE 2.2
2.
1.
Line up the tabs of the lens with the clips on
the sides of the Helmet. Insert one of the clips
into the hole in the tab of the lens front first
and then press the back of the tab over the
clip.
11