Technical Data - EINHELL ERGOTOOLS E-PST 800 L Manual De Instrucciones

Anleitung E-PST 800 L_SPK7:_
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual / safety
instructions with due care. Keep this manual in a
safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions / safety
instructions as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Important! Laser radiation
Do not look into the beam
Laser class 2
Achtung
Laserstrahlung
Nicht in den Strahl blicken!
Laserspezifikation
nach EN 60825-1:2001
Laser Klasse 2 1894S-8X11
P: ≤ 1 mW
Ï: 650 nm
Protect yourself and your environment from
accidents by taking the appropriate precautionary
measures.
Do not look directly into the laser beam with the
naked eye.
Never look directly into the laser path.
Never direct the laser beam at reflecting surfaces
or persons or animals. Even a low output laser
beam can inflict injury on the eye.
Caution: It is vital to follow the work procedures
described in these instructions. Using the tool in
any other way may result in hazardous exposure
to laser radiation.
Never open the laser module.
2. Layout (Fig. 1)
1. Knurled screw for speed control
2. Locking button
3. ON/OFF switch
4. Allen key
28.04.2008 16:15 Uhr Seite 13
5. Power cable
6. Adapter for dust extraction system
7. Adjustable soleplate
8. Selector switch for pendulum action
9. Dial scale for soleplate
10. Guide roller
11. Parallel stop
12. Saw blade
13. Locking screws for parallel stop
14. Blade holder
15. Safety guard
16. Laser
17. ON/OFF switch for laser
18. Screw for soleplate
19. Holder for saw blades
3. Proper use
The jigsaw is designed for sawing wood, iron, non-
ferrous metals and plastics using the appropriate saw
blades.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: 230 V~ 50 Hz
Power input:
Stroke speed: 500 – 3,000 min
Stroke height:
Cutting depth, wood:
Cutting depth, plastic:
Cutting depth, iron:
Miter cut: up to 45° (left and right)
Protection class:
Weight:
Laser class:
Wavelength of laser:
Laser output:
GB
710 W
-1
20 mm
80 mm
25 mm
10 mm
II /
2.3 kg
2
650 nm
≤ 1 mW
13