Daylight Saving Time Setting; Radio-Controlled Time Setting; 12/24-Hour Time Setting; Setting The Year, Day And Month - La Crosse Technology WS-9046U Manual Del Usuario

6. Press and release the SET button to confirm and advance to the

Daylight Saving Time setting.

V. DAYLIGHT SAVING TIME (DST) SETTING
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button twice.
4. "DST" will appear in the DATE LCD and either "ON" or "OFF" will
flash in the TIME LCD.
5. Press and release the ALM/+ button to select DST on or off.
TIME DST WWVB
MOON DATE
Note: "DST OFF" indicates that the feature is off and the WWVB will
not change times automatically. "DST ON" indicates that the feature
is on and the WWVB will change times automatically.
Note: Some locations (Arizona and parts of Indiana) do not follow
Daylight Saving Time, and should select "DST OFF".
6. Press and release the SET button to confirm and advance to the
radio-controlled time on/off setting.
VI. RADIO-CONTROLLED TIME ON/OFF SETTING
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button three times.
4. "RCC" will appear in the DATE LCD and "ON" or "OFF" will flash in
the TIME LCD.
TIME DST WWVB
MOON
P.9
GB
time has not been received after 10 minutes of battery installation, you
may manually set the time or leave the time function alone (reception
will occur regardless).
B. MANUAL TIME SETTING
Note: When in the 12-hour format "P.M." will appear to the left of the
hour in the time LCD between the hours of noon and midnight.
Note: Reception of the WWVB signal will automatically set the time.
The reception of the signal will override any programmed time.
TIME WWVB
MOON DATE
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button five times.
4. The hours digits will flash in the TIME LCD.
5. Press and release the ALM/+ button to advance the hours.
6. Press and release the SET button to confirm the hours setting and
advance to the minutes setting.
7. The minutes digits will flash in the TIME LCD.
8. Press and release the ALM/+ button to advance the minutes.
9. Press and release the SET button to confirm and advance to the
year setting.
IX. SETTING THE YEAR, DAY AND MONTH
Note: Reception of the WWVB signal will also set the date and day.
The reception of the signal will override any programmed date and
day.
TIME WWVB
MOON DATE
P.11
GB
5. Press and release the ALM/+ button to select radio-controlled time
on or off.
6. Press and release the SET button to confirm and advance to the

12/24-hour time setting.

VII.12 OR 24 HOUR TIME SETTING
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button four times.
4. "12h" or "24h" will flash in the DATE LCD.
5. Press and release the ALM/+ button to select 12 or 24-hour time
format.
TIME WWVB
MOON
Note: When in the 12-hour format "P.M." will appear to the left of the
hour in the time LCD between the hours of noon and midnight.
6. Press and release the SET button to confirm and advance to the
time setting.
VIII. TIME SETTING
There are two methods by which the time and date can be set:
A) Automatically via WWVB reception, or
B) Manually.
A. WWVB (Remote Control Time)
This method requires you to do nothing, except wait for the signal to
be received, and to select a time zone. Reception usually takes
approximately 10 minutes during optimal conditions. The best
conditions for reception is at night, between midnight and 6:00 am-
when there is less atmospheric interference. To keep your time as
accurate as possible, the indoor weather station conducts a WWVB
search every night between these hours, and overrides any manually
set time. The WWVB tower icon (appearing in the TIME LCD) will flash
when a signal-search is in progress and a signal is being received,
and will remain steady when the signal has been received. If the WWVB
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button seven times.
4. The year will flash in the DATE LCD.
5. Press and release the ALM/+ button to advance the year.
6. Press and release the SET button to confirm the year and advance
to the month setting.
7. The month will flash in the DATE LCD.
8. Press and release the ALM/+ button to advance the month.
TIME WWVB
MOON DATE
9. Press and release the SET button to confirm the month and advance
to the day setting.
10.The day of the month will flash in the DATE LCD.
11.Press and release the ALM/+ button to advance the day of the
month.
12.Press and release the SET button to confirm and advance to the
snooze setting.
X. SETTING THE SNOOZE
TIME WWVB
MOON
1. Press and hold the SET button for 5 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button ten times.
4. "Sn" will appear in the DATE LCD and a number will be flashing
next to it.
5. Press and release the ALM/+ button to select the duration of the
snooze.
P.10 GB
P.12 GB