99641522_A_ML2.qxp
EN
5 / CARING FOR AND CLEANING YOUR OVEN
• •
PERFORM A PYROLYSIS
•Immediate pyrolysis
Warning
Take out the oven fittings out, as well as the sliding dish support (see the chapter on
accessories in the "installation guide") and remove any large splashes that may have have
formed.
- - Check that the programmer is displaying the
time of day and that it is not flashing (fig.1).
You can choose between 2 lengths of time for
the pyrolysis:
Pyrocontrol:
between 1h30m and 2h12m depending on
how dirty it is.
Pyro Max:
pyrolysis duration 2h00m.
Press the
button (fig.2).
The pyrolysis duration by default displays
1h30 (fig.1), but you can make this longer or
shorter.
Example: pyrolysis cycle 2h00.
Press the + button to obtain the duration you
want (fig.3).
Confirm your selection by pressing S S t t a a r r t t .
The pyrolysis starts. The duration starts to
count down immediately after it has been set.
The
temperature rise symbol lights up.
During pyrolysis, the
programmer indicating that the door is locked
(fig.4).
When pyrolysis finishes, 0:00 flashes as well
as the
symbol.
- - When the oven is cool, use a damp cloth to
remove the white ashes.
The oven is clean and once again ready for the
cooking application of your choice.
14/05/2007
10:04
Page 108
duration of pyrolysis
symbol flashes in the
fig.1
fig.2
fig.3
fig.4
108