General Information; Description Of The Machines; Pictograms - Sima COBRA-40 Manual De Instrucciones

1. GENERAL INFORMATION

WARNING: before you operate this machine, you must read and study this manual.
SIMA S.A. thanks you for purchasing the FLOOR SAW model COBRA-40/45
This manual provides you with all relevant information about how to use safely use the floor saw as far as service,
maintenance and repairs are concerned. You will also find some relevant data directed to operators covering health and
safety aspects. If all safety instructions are ensured the operator will get a safe service as well as a simple maintenance.
Accordingly it is of primary importance that the operator understands how to operate this equipment safely (for
the use, maintenance or repairs)
We recommend you to have this manual at hand while the saw is being used

2. DESCRIPTION OF THE MACHINES

The floor saws SIMA S.A., model COBRA 40/45, are designed and manufactured to cut onto flat surfaces
x
asphalt, concrete, terrazzo, granite or ceramics. High-speed diamond blades are used and advancement is
manual.
Any misuse given to the bench saw will be considered as inappropriate and hazardous and remains
x
forbidden
Water tank included.
x
Security stop button on the chassis keyboard.
x
Flexible rubber tires and aluminium rims with double pillow block bearings.
x
Blade protection included and dual water cooling feed for blade directly from the water tank or from the mains
x
inlet.
Epoxy coating –Polyester to give high resistance to the chassis and keep it from rust
x
Guide device to check the straightness of the cutting
x
Easy to transport
x
Ergonomic design which ease its handle at medium and large sites and guarantees top performance
x
Cutting depth gauge for accurate depth of cut
x

2.1 PICTOGRAMS

Pictograms included in the machine entail the following:
READ INSTRUCTIONS MANUAL
USE HELMET AND EYE AND EAR DEFENDERS
5
ENGLISH