List Of Pictograms Used; Introduction; Intended Use; Scope Of Delivery - LIVARNO LUX 302484 Instrucciones De Montaje, De Uso Y De Seguridad

Introduction

List of pictograms used

Read the instructions!
Volt (AC)
Hertz (mains frequency)
Watt (effective power)
Protective conductor
LED ceiling light
Introduction
Congratulations on your new product.
You have selected a high quality product.
Please be sure to carefully read the com-
plete operating instructions. Fold out the page with
the illustrations. These instructions are part of the
product and contain important information on setup
and handling. Always follow all safety instructions.
Before using this product for the first time verify the
correct voltage and that all parts are properly in-
stalled. Should you have any questions or you are
unsure about operating the product, please contact
the dealer or service centre. Please keep these in-
structions in a safe place and pass them on to third
parties as applicable.

Intended use

This light is only suitable for indoor use in dry and
enclosed spaces. The light can be fastened to any
normally inflammable surface. This product is intended
for private household use only.
24 GB/MT
Observe the warning and safety
instructions!
Electric shock warning!
Danger to life!
Warning - hot surfaces!
For your safety
Dispose of packaging and device in
an environmentally-friendly manner!
b
a

Scope of delivery

Check immediately after unpacking that the parts are
complete and that the product is in proper condition.
1 LED ceiling light, model 14130102L
1 Glass plate
2 Protective tubes
2 Screws (mounting angle)
2 Locating screws
2 Decorative nuts
2 Tooth lock washers
4 Silicone rings
2 Spacers
2 Screws (spacers)
1 Metal support plate
1 Mounting bracket
2 Wall plugs
1 Set of assembly instructions and instructions for use

Parts description

Decorative nut
1
Silicone rings
2
Glass plate
3
Spacer
4
Metal support plate
5
Terminal housing
6
Tooth lock washers
7
Screws (spacer)
8