Remote Controller - DJI MATRICE 600PRO Manual De Instrucciones

5. Do not modify or alter the aircraft, its components, and parts.
Unauthorized modification may cause malfunctions and affect the
aircraft's functionality and safety.

Remote Controller

1. Ensure the remote controller is fully charged before each flight.
2. If the remote controller is powered on and has NOT been
used for 5 minutes, it will sound an alert. After 10 minutes it will
automatically power off. Move the sticks or perform some other
action to cancel the alert.
3. Adjust the clamp of the mobile device holder to allow a firm grip
on your mobile device.
4. Ensure the antennas of the remote controller are unfolded and
adjusted to the proper position to achieve optimal transmission quality.
5. Repair or replace the remote controller if damaged. A damaged
remote controller antenna will greatly decrease performance.
6. For the GPS in the remote controller to function properly and the
Home Point to be accurate, ensure the DJI logo is facing the sky
and keep the remote controller away from any metal objects.
7. Linking is required if you wish to replace your remote controller or
receiver or add a new remote controller. Refer to the User Manual
for details.
8. Make Sure that you first switch off the aircraft (after it is safe to do
so), then switch off the remote controller. Otherwise it may cause
the lost of control of the aircraft.
Center Frame
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
1. DO NOT short out the reserved ports on the center frame.
2. There are two DC18V power ports and one LIPO-6S power port
reserved on the center frame. The DC18V power ports have an
output voltage of 18 V and a maximum output current of 3 A. The
LIPO-6S power port has the same output voltage as the Intelligent
Flight Battery and a maximum output current of 10 A. Use the
power ports in strict accordance with their specifications.
3. DO NOT damage the cables when mounting or removing the upper
or lower plate of the center frame.
Frame Arms
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
1. The external antennas of the Lightbridge 2 Air System are mounted
to the M3 and M6 frame arms upon delivery. DO NOT move the
antennas.
Retractable Modules
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
1. DO NOT interchange the cabling of the left and right retractable
modules, or else the landing gear will not function normally.
Landing Gear
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
1. Mind your fingers when mounting the springs to the landing gear.
2. Ensure the landing gear is lowered before landing.
©
2016 DJI All Rights Reserved.
6
Flight Control System
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
Flight Controller
1. DO NOT attempt to modify the structure of the flight controller.
2. DO NOT change the mounting position and orientation of the
flight controller.
3. DO NOT short out the ports on the flight controller.
4. Connect cables in strict accordance with port descriptions.
Power Management Unit (PMU)
1. The PMU has an input voltage range of 10.5-51 V (3-12S battery
equivalent), output voltage of 9 V and maximum output current
of 2 A. Be sure to use the PMU in strict accordance with these
specifications.
2. Only use the power cable extending from the center frame to
supply power to the PMU.
IMU Pro (Redundancy System)
1. DO NOT change the mounting position and orientation of the
IMU Pro.
2. Settings in the DJI ASSISTANT
Flight Controller
1. The flight controller is neither waterproof nor oil-proof. DO NOT
allow it to come into contact with any kind of liquid.
2. Check regularly to ensure the flight controller is firmly secured.
3. DO NOT place devices producing heat near the flight controller.
PMU
1. The PMU is neither waterproof nor oil-proof. DO NOT allow it to
come into contact with any kind of liquid.
2. DO NOT block or cover the PMU to maximize heat dissipation and
system performance.
IMU Pro (Redundancy System)
1. The IMU Pro is neither waterproof nor oil-proof. DO NOT allow it to
come into contact with any kind of liquid.
2. Check regularly to ensure the IMU Pro is firmly secured.
Lightbridge 2 Air System
To avoid component malfunction, serious injury, and property
damage, observe the following rules:
1. ONLY use the DBUS cable that comes with the Matrice 600 Pro, or
else the Lightbridge 2 Air System will not function normally.
GPS-Compass Pro
To avoid component malfunction, serious injury, and property
damage, make sure:
1. GPS-Compass Pro's collapsible mount is unfolded and the
extension rod is securely mounted before each flight.
2. GPS-Compass Pro are securely mounted and the arrows are
pointing toward the front of the aircraft.
3. Settings in the DJI Assistant 2 are correct.
To avoid possible serious injury and property damage, observe the
following rule:
1. Land immediately when severe drifting occurs in flight, i.e., the
aircraft does NOT fly in straight lines.
TM 2 are correct.