Removing The Freezer Drawer - GE 20 Manual Del Propietario E Instalación

Installation Instructions
REMOVING THE FREEZER DRAWER
The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completelg and carefullg.
[] REMOVE THE BASKET
[] Open the freezer drawer until it stops.
[] The freezer basket rests on a frame inside the
freezer drawer. Lift the basket up at the back.
[] Lift the front up and lift the entire basket up
and out of the drawee
\
[] REMOVE THE DRAWER FRONT
FROM THE SLIDES
[] Remove the screw on each side of the railing,
\
Screw
[]
[]
[]
[]
REMOVE THE DRAWER FRONT FROM
THE SLIDES (cont.)
Lift up on both sides of the freezer drawer
handle to separate the drawer railings from
the rail assemblies.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into locking
position.
\
Rail Assemblg Drawer
Assemblg
[] REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not
fit through a doorwag, the base grille can be
removed.
[] Remove the base grille bg removing the
screws.
21