Warranty; Spare Parts; Environment Protection; Noise Level Declaration - Sima MAGNUM 700 Manual De Instrucciones

13. WARRANTY

SIMA, S.A. the manufacturer of light machinery for construction possesses a net of technical services "SERVI-
SIMA".
Repairs under warranty made by SERVÍ-SIMA are subject to some strict condition to guaranty a high quality
and service.
SIMA S. A. guarantees all its products against any manufacturing defect; to take into account the conditions
stated in the attached document "WARRANTY CONDITIONS". The latter would cease in case of failure to comply with
the established payment terms. SIMA S.A. reserves its right to bring modifications and changes to its products without
prior notice.

14. SPARE PARTS

The spare parts for for the cutting table, model MAGNUM, manufactured by SIMA, S.A. are to be found in the
spare parts plan, attached to this manual.
To order any spare part, please contact our alter-sales service clearly indicating the serial number of the
machine, model, manufacturing number and year of manufacturing that show on the characteristics plate.
To order any spare part, please contact our alter-sales service clearly indicating the serial number of the
machine, model, manufacturing number and year of manufacturing that show on the characteristics plate.

15. ENVIRONMENT PROTECTION

Raw materials have to be collected instead of throwing away residuals. Instruments, accessories, fluids and
packages have to be sent into specific places for ecological reutilisation. Plastic components are marked for
selective recycling.
R.A.E.E. Residuals resulting from electrical and electronic instruments have to be stored into
specific places for selective collection.

16. NOISE LEVEL DECLARATION

Level of acoustic power issued by the machine:
Level of acoustic power issued by the machine: A, LW
MAGNUM-900 / 1000
The values mentioned above are level of emission and are necessarily levels that allow working with the
machine. Still, there is a relation between the levels of emission and those of exposure. These are not reliable to
determine if they are necessary measurement of supplementary prevention. The parameters that affect the real
exposure level include the duration of the exposure, the characteristics of the location, other sources of noise, etc.
In addition, the levels of admissible exposure can vary from one country to the other. Still, this information
allows the operator to evaluate better the risks of the machine.

17. MECHANICAL VIBRATIONS LEVEL DECLARATION

The level of vibrations transmitted to the hand-arm:
MODEL
MAGNUM-700
MAGNUM-900 / 1000
111,5
LEFT HAND m/ s²
0,05350
0,05350
-16-
, in dB
A
MAGNUM-700
111,5
RIGHT HAND m/ s²
0,02079
0,02079
ENGLISH