Chauvet DJ STAGE DESIGNER 50 Manual De Usuario página 10

Item Button or Fader
1 Channel Faders
2 Channel Flash button
3 Channel Faders
4 Scene Playback
indicators
5 Channel Flash button
6 Down/Beat Rev
7 Up/Chase Reverse
8
LCD Display
9
Delete/Rev One
10 Aux 1
11 Insert/%or255
12
Aux 2
13 Edit/All Rev
14 Record/Shift
15 Audio/Page A_B
16 Blind
17 Chase Rev
18
Dark
19 Home
20 Park
21 Mode Select/Rec
Speed
22 Tap Sync
23 Hold
24 Page
25 Full On
26 Step
27 Add Kill/Rec exit
Rev. 9
Function
Indicates channels 1-12(25-36)
Brings the relevant fader to 100% or DMX value of 255
Indicates channels 13-24(37-48)
Indicates that the scene is playing back
Brings the relevant fader to 100% or DMX value of 255
Down functions to modify a scene in Edit mode, Beat Rev is used to
reverse the chasing direction of a program with regular beat
Up function to modify a scene in Edit mode, Chase Reverse is used to
reverse the chasing direction of a program under Speed Slider control.
Shows the current activity or programming state
Delete a step in a scene or reverse he chasing direction of any program
Patchable; used to control a channel in 1 of 2 modes of operation
Insert is to add 1 step or steps into a scene; %or255 is used to change the
display value cycle between % and 0-255
Patchable; used to control a channel in 1 of 2 modes of operation
Edit is used to activate Edit mode; All Rev is to reverse the chasing
direction of all programs
Record is used to activate Record mode or program a step; Shift functions
the alternate function of other buttons only
Audio activate audio sync of chase; Page A_B switches the channel
faders BETWEEN 1-24 MODE AND 25-48 MODE. Press and hold Record
& Page A_B to switch between the 2 channel pages.
Takes the channel out of a program temporarily in Chase◄►Scene mode
Reverses the direction of the chase playback
Used to temporarily blackout overall output
Used to deactivate the Blind on a given channel
Used to select Single/Mix Chase, bring Channel 13-24(37-48) to full of
current setting, or momentarily program a scene into Master B slider
depending on the current mode.
Used to activate the operating mode; Rec Speed sets the speed of any
programs chasing in Mix mode
Repeatedly tapping this button will establish the chase speed
Used to momentarily maintain current scene
Tap to select pages of scenes from 1-4(Page A) and 1-4 (Page B)
Momentarily bring all channels (1-48) to full intensity
Used to go to the next step when the Speed slider is set in Show Mode or
in Edit mode.
In Add mode, multiple scenes or Flash buttons will be on at the same time;
In Kill mode, pressing any Flash button will kill any other scenes or
programs; Rec Exit is used to exit from Program or Edit mode.
10 Stage Designer™ 50