Victron energy BlueSolar PWM Serie Manual página 10

6. Specifications
BlueSolar Charge Controller
Battery Voltage
Charge & Load Current
Charge mode
Automatic load disconnect
Maximum solar voltage
Solar voltage range
Self-consumption
Protections
Solar Panel
Recommended solar panel array
Max Solar Input Power
USB outputs
Voltage
Current
Default settings
Absorption charge (b01)
1
Float charge (b01)
1
Load disconnect (b01)
1
Load reconnect (b01)
Enclosure
Terminal size
Weight
Dimension (h x w x d)
Mounting
Humidity (non condensing)
Operating temperature
Cooling
Protection class
Standards
Safety
EMC
1
See also 3.1 Battery type setting.
8
Wiring error or short circuit in the load output circuit
• Wiring error: the minus of the load and the minus of the
battery are interconnected.
Internal defect.
•
12V/24V|30A
12/24V Auto Select
30A
55V
15-28V 30-55V
36cell 72cell
360W 720W
1
14.4V 28.8V
13.7V 27.4V
11.2V 22.4V
12.6V 25.2V
48V|10A
10A
PWM, Time and Lighting Control
Yes
<15mA
Reverse polarity connection of the solar panels.
Reverse polarity connection of the battery.
Low voltage disconnect.
110%-130% load: Shuts down after 60sec.
130%-160% load: Shuts down after 5sec.
Short circuit: immediate shut down.
Over-temperature protection.
2x72cell in series or 4x36cell in series
480W
5V
2A (total from 2 USB outputs)
16mm² / AWG6
300gr
101.50x184.00x47.10 mm
Vertical wall mount Indoor only
Max. 95%
-35°C to +60°C (full load)
Natural convection
IP20
EN60335-1, IEC62109-1
EN61000-6-1, EN61000-6-3
48V|20A 48V|30A
48V
20A 30A
100V
60-100V
960W 1440W
57.6V
54.8V
44.8V
50.4V