American Standard AquaWash 2.0 SpaLet 8019A60GPC Manual Del Usuario página 5

INSTALLATION
Please read the instructions carefully before installing and using.
WARNING
1
Remove existing toilet seat.
2B
Place the base plate in the slotted area of the template
and then place the hardware onto the base plate as
shown. Screw in the nuts from the underside of the
ceramic until the base plate is fixed.
BOLT
The product requires a exible supply hose.
The water shutoff valve should be near the installed product for ease of installation.
Do not use in hot water line. Temperature above 104°F / 40°C will damage the product and void your warranty.
BASE
PLATE
NUT
2A
Press the inserts into the toilet bowl holes. Align the
base plate to the slotted area of the template and
then place the hardware onto the base plate as
shown. Using a medium size Phillips screwdriver,
start screwing down the bolts into the inserts until
the base plate is fixed.
If the insert does not fit the bowl, proceed to Step 2B,
otherwise, skip Step 2B
and continue with Step 3.
3
Slide the SpaLet seat across the base plate until you hear
®
a click. The SpaLet seat is now assembled to the bowl.
4
Turn off the water supply by turning off the water shutoff
valve, then disconnect the supply hose.
If you are using a rigid supply line you will need to
purchase a flexible supply hose to install the SpaLet seat.
5
BOLT
BASE
PLATE
760294-100 Rev 1 3/19