Kit Assembly - Metra 99-7323 Instrucciones De Instalación

DIN radio provision with pocket
1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage and secure. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-7323
ISO radio provision with pocket
1. Mount the ISO brackets to the
aftermarket radio using the screws
supplied with the radio. (Figure A)
2. Slide the radio/bracket assembly
into the radio opening until the side
clips snap into place. (Figure B)
3. Snap the trim plate into the radio
housing. (Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.
3
(Figure A)
(Figure B)