Kit Assembly - Metra 95-7323 Instrucciones De Instalación

Double DIN radio provision
1. Snap the Double DIN brackets to
the inside edge of the Double DIN
trim plate. (Figure A)
2. Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly
using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.

Kit Assembly

(Figure A)
95-7323
(Figure B)
3