Kit Assembly - Metra 99-8905B Instrucciones De Instalación

ISO DIN radio provisions
with pocket
1. Attach the brackets to the radio
trim panel. (Figure A
2. Attach the pocket to the radio trim
panel/brackets using the supplied
four #8 x 3/8" Phillips screws.
(Figure B)
3. Attach the aftermarket radio to
the trim panel/pocket/bracket
assembly using the ISO screws
supplied with the radio. (Figure C)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
5. Reassemble dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
99-8905B
(Figure B)
3
(Figure C)