Hyundai Tiburon (DDIN) 1997-2002
1. Remove (4) Phillips screws securing the
center console.
Pry out on the front edge of the console
and unclip the radio trim bezel.
Remove (2) Phillips screws securing the
factory pocket and remove.
Remove (4) Phillips screws securing the
factory head unit and disconnect the
wiring. (Figure A)
2. Attach spacer 3L and 4L to the left
mounting tabs of the radio housing and
spacer 3R and 4R to the right mounting
tabs of the radio housing as shown.
(Figure B)
Continue to kit assembly
Dash Disassembly 99-7309
(Figure A)
(Figure B)
7
"3L"
"4L"
"3R"
"4R"