Dash Disassembly; Hyundai Elantra (Ddin) 1996-2000 - Metra 99-7309 Instrucciones De Instalación

Hyundai Elantra (DDIN) 1996-2000

1. Pop out the dimmer switch panel and
remove (1) Phillips crew exposed.
Unsnap the gear shifter trim plate and
remove (1) Phillips screw exposed at
the base of the dash trim bezel.
Reach under the driver's side dash,
locate the temperature control cable
and remove the cable from the white
plastic bracket.
Position the gear shifter in low, pull the
dash panel away and disconnect all
wiring harnesses.
Remove the trim bezel (the temperature
controllable will be attached).
Remove (4) Phillips screws securing the
factory head unit and disconnect the
wiring. (Figure A)
2. Attach spacer 1L and 2L to the left
mounting tabs of the radio housing and
spacer 1R and 2R to the right mounting
tabs of the radio housing as shown.
(Figure B)
Continue to kit assembly

Dash Disassembly 99-7309

(Figure A)
(Figure B)
3
"1L"
"2L"
"1R"
"2R"