Auto Datalogging - RS Pro RS-1151 Manual De Instrucciones

Datalogger Sound Level Meter / EN

8-3 Auto Datalogging

Only micro SD CARD 4GB can be use.
1. To clear the auto memorized data
Press and hold down TIME key then press
until the "
Press ▲ key 4 times to select this mode, the "
Press ↵ key to enter this mode, then press ▲ key to select "
If select "
the "
clear function is finished. If there is no SD CARD in the meter, the "
mark is displayed for 2 seconds.
2. Setting the interval time
Press and hold down TIME key then press
on the meter, until the "
Press ▲ key one time to select this mode, the "
Press ↵ key to enter this mode, the "
Using ► key to position the cursor on the minute or second element to
adjust.
Using ▲ key to setting the desired interval time from 1 second to 59
minutes 59 seconds.
Press ↵ key to complete the action.
3. To set auto datalogging
Press LOG key for 3 seconds to enter this mode, the "
displayed then to record the measuring data automatically the "A" mark
is displayed. When the "M" mark appears once, one set of reading is
stored to the memory.
If there is no SD CARD in the meter, the "
If memory is full, the "
4GB or 99 blocks.
Press LOG key for 3 seconds to exit.
4. To download the recorded data to PC connect the USB cable to PC and the
meter.
12
" mark is displayed.
", press ↵ key to perform clear the auto memorized data,
" mark is displayed, when the "
" mark is displayed.
:
" mark is displayed for 2 seconds.
" mark is displayed. The maximum capacity is
key to turn on the meter,
" mark is displayed.
"mark has disappeared, the
key for 3 seconds to turn
" mark is displayed.
" mark is displayed.
m:s
" mark is
09/15/17 Version No. 00
" or " ".
"