Scope Of Delivery (For Change Neck Torch Only); Putting Into Operation - Abicor Binzel ABIMIG A Instructivo De Servicio

4 Scope of delivery (for change neck torch only)

Symbol Description
• Bullet symbol for instructions and lists

Cross reference symbol refers to detailed, supplementary or further information
1 Step(s) described in the text to be carried out in succession
4 Scope of delivery (for change neck torch only)
The ABIMIG
of modular construction:
1 BASIC torches:
• Torches ready for welding in lengths of 3, 4 and 5 m with standard equipment for wear
parts and the wire guide, central connector
KZ-2 or WZ-2, operating instructions and spare parts list.
2 COMBI torches (in two separate sub-assemblies):
• Basic torches in lengths of 3, 4 and 5 m with standard equipment for the wire guide,
central connector KZ-2 or WZ-2, operating instructions and spare parts list.
• COMBI torch neck with standard wear parts.
3 VARIO torches:
• Torches ready for welding in freely selectable lengths and modular construction with
operating instructions and a spare parts list.
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the
current catalogue or the spare parts list supplied. The contact details for advice and orders can
be found online at www.binzel-abicor.com.

5 Putting into operation

DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance, servicing,
assembly, disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
EN - 6
®
A T LW/W T torch range is divided into three torch series depending on the level
ABIMIG
BAL.0402.0 • 2018-08-24
®