Designated Use; Technical Data - Abicor Binzel ABIMIG WT Instructivo De Servicio

®
ABIMIG WT

1 Designated Use

2 Technical Data

Transport and storage
Relative humidity
Tab. 1 Ambient temperature
Type of voltage
DC polarity of the electrodes
Shielding gas (DIN EN ISO 14175)
Wire types
Voltage rating
Protection type of the machine side connections
(EN 60 529)
Control device in handle
Tab. 2 General torch data according to EN 60 974-7
Type Type of
cooling
Single
circuit
®
ABIMIG
240 D WT liquid
401 D WT liquid
401 WT liquid
501 D WT liquid
501 WT liquid
Tab. 3 Product-specific torch data (EN 60 974-7) ABIMIG
1For pulse arcs, the load data are reduced by up to 30%.
MIG/MAG manual welding torches are used for safe welding of low- and
high-alloy materials. They consist of the torch neck with equipment parts and
wear parts, handle and cable assembly with central connector. They conform
to EN 60 974-7 and are not considered devices having their own functions. Arc
welding can only be carried out in connection with a welding power supply.
1 Wire 
Load ED
CO M21
2
A A % mm
300 270 100 0.8 - 1.2 10 - 20 50
400 350 100 0.8 - 1.2 10 - 20 50
450 400 100 0.8 - 1.2 10 - 20 50
500 450 100 1.0 - 1.6 10 - 20 50
550 500 100 1.0 - 1.6 10 - 20 50
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC
Usually positive
CO and mixed gas M21
2
commercially available round wires
113 V peak value
IP3X
for 42 V and 0.1 to 1 A
Gas Cooling
flow
Max. supply
temp.
l/min °C
®
WT
1 Designated Use
Flow
pressure
Min. min. max.
flow
l/min bar bar
1 1.5 3.5
1 1.5 3.5
1 1.5 3.5
1 1.5 3.5
1 1.5 3.5
EN - 3