Amann Girrbach Ceramill map 400 Modo De Empleo página 40

I N S T A L L A T I O N
NOTE:
E N
The tiltable upper element of the fixator may not be put into the scanner when not secured (affixed)!
▷ Firmly tighten the screw on the rear side of the fixator!
▷ Afterwards, tighten the lateral screw.
▷ Place the fixator into the scanner.
The clamp of the fixation plate must engage in the bottom element of the fixator.
Fig. 11 Fixator in the Ceramill Map400
1 Artex fixator
2 Screw
3 Fixation plate with clamp
4 Spacer plate (optional)
40
1
2
3
4
5
5 Artex Scan base plate