R E G I S T R A T I O N A N D D O W N L O A D I N F O R M A T I O N
7
Registration and Down-
load Information
E N
7.1
Registration, M-center
To download updates and upload data to the man-
ufacturing center, it is necessary to register on
the M-Center page. To register, log on to
www.ceramill-m-center.com
instructions for registration can also be found at
the specified address.
7.2
Download Infos
Further instructions (video tutorials) on operating
the Ceramill Map scanner and the Ceramill Mind
software can be downloaded under
www.ceramill-m-center.com
Software updates are also available on our web-
site under
8
Cleaning and Maintenance
8.1
Cleaning
The scanner must be cleaned regularly.
▷ Switch the scanner off.
NOTE:
Possible damage to the 3D sensor:
▷ Do not clean the optics of the 3D sensor in the
top of the scanner!
▷ Carefully vacuum out the interior of the scanner.
▷ Wipe off the housing with a moist cloth. Do not
use aggressive cleaning agents.
8.2
Maintenance
Maintenance may be carried out only by trained,
specialized personnel.
50
. Information and
.
www.ceramill-m-center.com
9
Malfunctions, Repairs and
Warranty
9.1
Malfunctions
In case of malfunctions:
▷ Restart the software.
▷ Restart the scanner.
▷ Restart the PC.
▷ Check the cable connections; disconnect and
then re-connect, as required.
If these measures do not correct the problem:
▷ Contact the Ceramill helpdesk (workdays from 8
to 5 p.m.).
▪ Germany: +49 7231 957 100
▪ Austria: +43 5523 62333 390
▪ International: +43 5523 62333 399
▪ helpdesk@amanngirrbach.com
.
9.2
Repairs
Repairs may be carried out only by trained, spe-
cialized personnel.
9.3
Warranty
The warranty complies with the statutory provi-
sions. For more information, please refer to our
General Terms of Business.
10
Environmental Protection
Packaging
In terms of packaging, Amann Girrbach partici-
pates in country-specific recycling systems, which
ensure optimal recycling.
All packaging materials used are environmentally-
friendly and recyclable.