You
have
chosen
EN
Rollator.
Please read these instructions carefully before any use
This rollator was recommended to you by a healthcare professional
to give you improved and safer mobility indoors and outdoors.
Do not use it if you have serious balance disorders or weakness or
shakiness of the upper limbs.
The ND rollator is a lightweight 4-wheeled "rollator" walker with a
padded canvas seat, very easy to fold up with one hand and without
leaning over, and easy to carry and to transport. Once folded up, it
stays in the upright position by itself. Its lightweightness combined
with the "kerb climber" makes it easy to overcome obstacles such as
kerbs, for example.
This rollator is designed for indoor and outdoor use on
•
stable and flat surfaces without any holes, grooves, or
ruts.
Check that the product has been delivered to you in a
•
proper condition before making any use of it.
The ND rollator should be assembled by a specialist
•
dealer.
UNFOLDING/FOLDING
Remove the packaging. Place the rollator on one side.
cf. photo No. 1.
1. First side: installing the wheels
Installing the rear wheel:
Unscrew and remove the knob nut, and then unfold the rear wheel
supports until the holes are aligned. Put the knob nut back in place
while making sure it is fully tightened. cf. photo No. 2.
Thuasne's
New
Design
Photo No. 1
Photo No. 2
Installing the front wheel:
Unscrew and remove the knob nut, and then unfold the front wheel
supports until the holes are aligned. cf. photo No. 3.
Put the knob nut back in place on the front wheel while making sure
it is fully tightened. cf. photo No. 4.
2. Second side
Place the rollator on the second side and proceed in the same
manner as for the first side.
3. Opening the rollator
Place the rollator on its wheels, and pull the handles apart. cf. photo
No. 5.
Push on the side tubes of the seat until the fastening mechanism
engages. Caution: be careful not to pinch your fingers. cf. photo No. 6
CLICK
!
- 8 -
Photo No. 3
Photo No. 4
Photo No. 5
Photo No. 6