Unpack And Check The Device - Walimex Pro VC Excellence Plus Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
Danger of burning on hot parts
The modeling lamp and flash tube could
heat up up to 240°C, the reflector up to
75°C and the flash housing up to 45°C.
■ Don´t touch the parts during operation
and cooling down.
■ Please cool down your device approx.
30 minutes before starting any mounting
or maintenance arrangements.
WARNING
Danger of cutting and splitting through
breaking modeling lamp and breaking
or bursting flash tube.
Even small residues of skin oil on the
flash tube could lead, due to the high heat
impact, to the splitting of the flash tube.
Broken glass could hurt eyes and skin.
■ Please handle the modeling lamp and
flash tube with care to avoid bursting.
■ Don´t touch the flash tube with bare
hands. Wear clean cotton gloves or use
a clean cloth.
■ Avoid touching the flash tube acci-
dentally when mounting or changing
accessories.
WARNING
Only connect the device to an earthed
socket.
WARNING
Danger of suffocation caused by
small parts
Keep the device out of the reach of child-
ren and pets.

3. Unpack and check the device

1. Carefully unpack the scope of delivery.
NOTE
Keep the Styrofoam box for future storage
and transportation.
2. Check whether the scope of delivery is
complete:
• Studio Flash with protection cap
• Reflector
• Modeling Lamp
• Sync Cord
• Power Cord
3. Check whether the scope of delivery is
free of damage.
NOTE
If the scope of delivery is incomplete or da-
maged, please contact info@walimexpro.de
or call our service hotline under the number
+49 8432 9489-0.
NOTE
Within the scope of product improvements
we reserve the right for technical and
optical changes. Not subject to identifica-
tion as per RL 2010/30/EC – Not suitable
for illumination purposes in households.
Specially developed for photo and video
shooting requirements.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido