Screw In And Out Of Modeling Lamp - Walimex Pro VC Excellence Plus Serie Manual Del Usuario

WARNING
Danger of burning on reflector, modeling
lamp and flash tube. Please let the device
cool down for approx. 30 minutes.
• Demount protection cap.
See Demount and mount protection cap.
• Push back unlocking lever and keep
pressed.
• Plug the reflector into the openings, so
that the opening for the reflex umbrella
(optional) faces downwards.
• Turn the reflector clockwise and listen for
the reflector to snap into place.
• Release the unlocking lever.
• Stick the safety cap onto the unlocking
lever.
2. Demount reflector:
WARNING
Danger of burning on reflector, modeling
lamp and flash tube. Please let the device
cool down for approx. 30 minutes.
• Remove safety cap from unlocking lever.
• Push back unlocking lever and keep
pressed.
• Turn the reflector anticlockwise as far as it
will go and take off from the device.
• Mount protection cap.
See Demount and mount protection cap.
32
7. Screw in and out of modeling
lamp
WARNING
Posterior danger of bursting of flash
tube through skin oil
Never touch the flash tube with your bare
hands!
1
2
1 Modeling Lamp
2 Socket
1. Switch off device.
See Switch on and off of device.
2. Plug off power cord.
3. Let the device cool down.
WARNING
Danger of burning on reflector, modeling
lamp and flash tube. Please let the device
cool down for approx. 30 minutes.
4. Screw in modeling lamp:
• When the protection cap is mounted:
Demount protection cap.
See Demount and mount protection cap.
• Screw the modeling lamp carefully into the
socket.