Technical Data - Soehnle SOLAR FIT Instrucciones De Manejo

Ocultar thumbs Ver también para SOLAR FIT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
A. Operating elements
1. Confirm (
)
2. Minus ( )
3. Plus ( )
B. Preparation
1. For all measurements place scale level on a hard
surface (not carpet). Ensure sufficient illumination.
Do not cover solar cells.
2. A country-specific option to switch from kg/cm to lb/
in or st/in is possible by pushing the key on the bot-
tom of the scale to switch units.
Attention! Slipping hazard
in case of wet surface.
C. Data input
Note: Place the body analysis scale on a level surface.
Then begin with data entry. Otherwise, it might be pos-
sible that the weight of the scale would erroneously be
added to the initial weighting process.
The same might occur if the scale is held in the hand
prior to the weighting process.
1. Start data entry (push
2. Select memory slot (P1 ... P8) (
plus) and confirm (
).
3. Enter body height and age
and confirm (
).
4. Select gender using
and confirm (
).
5. The number of the memory slot is being displayed.
Push
key.
0.0 appears on the screen.
6. Then immediately step on the scale with bare feet
for the first body analysis. If you step on the scale
with socks or shoes, then only the body weight will
be displayed.
The initial measurement is indispensable and serves to
store the data for later automatic recognition of persons.
If no person steps on the scale, data entry must be
repeated.
This scale is equipped with a Time-Out mode. It will
automatically switch off after approx. 40 seconds if no
keys are pressed.
- key for 1 second)
= minus,
=
= minus,
= plus)
(
= male,
= female)
D. Body analysis
1. Step on the scale with bare feet; stand still for
approx. 5 sec.
2. Automatic recognition of persons. Select personal
memory slot (
) if person cannot be automatically
recognized.
3. Display weight, body fat content, body water content,
and personal memory slot.
Note: Body fat and water are calculated based on the
determined weight and the personal data.
4. Step off the scale.
E. Messages
1. Overload: Over 150 kg.
F. Cleaning and Care
Clean only using slightly damp cloth. Do not use sol-
vents or abrasives. Never submerge scale in water.
G. Technical data
Load capacity x graduation = max. 150 kg x 100 g
Graduation of body fat content: 0.1%
Graduation of body water content: 0.1%
Body height: 100-250 cm
Age: 10-99 years
8 individual memory slots
H. Guarantee
For 3 years as of the date of purchase, Soehnle gua-
rantees the removal of defects due to material or proces-
sing errors, free of charge, by way of repair or replace-
ment. In case of a guarantee claim, please return your
scale to your seller, together with purchase receipt and
guarantee card.
I. EC Conformity
This device complies with the applicable EC
Directive 2004/108/EC.
K. Disposal of electric and electronic devi-
ces EC Directive 2002/96/EC
This product is not to be treated as regular
household waste but must be returned to a
collection point for recycling electric and elec-
tronic devices. Further information is available
from your municipality, your municipality's waste disposal
services, or the retailer where you purchased your pro-
duct.
EN
3

Publicidad

Tabla de contenido
loading

Tabla de contenido