Safety Information; Safety Warnings; Preliminary Recommendations; General Information - WEG CFW500 Guia De Instalacion

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

NOTE!
This guide contains important information
„
for the correct understanding and proper
operation of the Flash Memory Module
CFW500-MMF.
Only use the Flash Memor y Module
„
CFW500-MMF in WEG CFW500 inverters.
Read the CFW500 user's manual before
„
installing or operating this accessory.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories of the frequenci inverter
CFW500.
Wait at least 10 minutes to guarantee
„
complete de-energization of the inverter.

2 GENERAL INFORMATION

This guide shows how to install, configure and
operate the CFW500-MMF Flash Memory Module.
This accessory allows data transfer, such as user's
parameter set (1 and 2 standard users) and SoftPLC
user's program. It is powered up by batteries and, thus,
there is no need to power up the inverter for CFW500-MMF
operation.
ATTENTION!
T h e C F W5 0 0 - M M F a c c e s s o r y c a n
„
only remain connected to the CFW500
frequency inverter during the data transfer
operations in this case, the inverter must
be unpowered.
During normal operation of the inverter,
„
th e CF W50 0 -M M F must b e a lways
disconnected.
Flash Memory Module
CFW500 | 5