ALPHA-TOOLS HLG 2000 Manual De Instrucciones página 6

Anleitung HLG 2000 SPK7
GB
Before starting operation, be
sure to read the operating and
safety instructions!
Proper use
The hot air gun is designed for hea-
ting shrink-down plastic tubing, for
stripping paints and for welding and
shaping plastics.
Attention:
Fire hazard during use! Diagram
of the hot air pistol:
1 nozzle
2 2 level ON/OFF switch
3 suspension shackle
4 power cable
5 Deflector nozzle
6 Fishtail nozzle
7 Cone nozzle
8 Reflector nozzle
9 Paint scraper
Technical data:
Nominal voltage: 230 V ~ 50 Hz
Power rating: 2000 watt
Temperature: 350°C / level 1
550°C / level 2
Air rate: 300 l / level 1
500 l / level 2
Weigth
6
29.11.2005 10:01 Uhr
Safety Instructions:
G Before plugging in the power
supply cord, be sure that the
ON/OFF switch is in the central
position.
G The nozzle reaches temperatu-
res of up to 600°C. Fire hazard!
Wear protective gloves and
eye wear. The nozzle should
not be touched during
operation.
G Allow the hot air pistol to comple-
tely cool before putting away.
G Never expose the unit to rain or
moisture. Store the unit in a dry
place.
G Do not leave the unit unattended.
Keep out of reach of children.
G Never direct the air flow at
people or animals. Do not use
the unit to dry clothing or hair.
Do not use the hot air blower
as a hair dryer.
G Do not use the unit near easily
flammable or explosive sub-
stances or gasses.
G Never block the hot air flow by
plugging or covering the air flow
exit.
G Use only original accessory and
replacement parts from the
manufacturer.
G Do not wear loose clothing or
0,7 kg jewelry. Wear slip-resistant
shoes and wear a hair net for
long hair. During operation main-
tain a secure footing.
G Never use the unit in wet surro-
Seite 6