GE PHP9030DJBB Instrucciones De Instalación página 6

INSTALLING THE COOKTOP (Cont)
4
ATTACH FOAM TAPE
Apply the foam tape around the outer edge of the
glass. Do not overlap the foam tape.
Bottom of Cooktop
Foam Tape
Cooktop
Glass
5
MOUNTING PARTS
Remove the hold down brackets and screws from the
literature package.
Screw the Hold Down Bracket
to the side of the cooktop unit.
Repeat for opposite side of
cooktop.
Bottom of Cooktop
Foam Tape
Front of Cooktop
Cooktop Glass
Alternate Installation:
You can order an alternate installation kit
WB01X24570 with wing nuts and brackets by calling
GE Appliances at 800.GE.CARES (800.432.2737).
See diagram for instructions.
Open the cabinet door. Install the second screw
through the bracket and tighten. Then tighten the first
screw. Install thumbscrew until it touches the bottom
of the countertop.
Cooktop
IMPORTANT: Turn the thumbscrew until it touches
the bottom of the countertop. Do not overtighten.
6
Installation Instructions
Mounting Screw
Pre-Drilled Hole
Side of Cooktop
Hold Down
Bracket
Countertop
6
INSERT COOKTOP INTO CUTOUT
Insert the cooktop centered into the cutout opening.
Make sure the front edge of the countertop is parallel
to the cooktop. Make final check that all required
clearances are met.
Hold Down
Bracket
Attach Hold Down Brackets to cabinet.
NOTE FOR INSTALLING ABOVE A WALL OVEN:
When installing the cooktop above a single wall oven,
do not install the baffle. The wall oven will need to
be removed during the cooktop installation and then
re-installed into its space.
IMPORTANT: Maintain a minimum distance of 31-1/4"
from the top surface of the countertop to the wall oven
platform to ensure that the cooktop and wall oven do
not interfere with each other (see picture).
2-1/2" min. (6.4cm)
31-1/4" min.
(79.4 cm)
Cooktop
Cooktop
Wall Oven
SIDE VIEW
31-2000021-1