GMCW GRINDMASTER RC400 Manual De Mantenimiento página 3

3
NOTICE
For best results, remove used Real Cup™ capsule from brew chamber when brewing is complete.
Avoid spills by not removing the reservoir while Auto-Fill unit is filling; allow complete filling cycle before removing
reservoir.
A qualified professional should perform installation, maintenance and repairs.
Installation, maintenance or repairs by unqualified personnel may damage the brewer and void the manufacturer's
warranty.
This equipment must be installed in accordance with the appropriate national and local codes of the country and/or
region in which the appliance is installed.
Contact the manufacturer to report any malfunction of or damage to the brewer.
When turning the machine off for an extended period, be sure to evacuate the water inside the piping completely,
otherwise the water inside the machine could freeze and lead to damage or cause mold to appear.
To reduce foreign material from entering the brewer, keep brew chamber and reservoir lids closed.
Installation
Where to Install
Brewer should be installed on a firm, stable, level surface. Keep away from pets. Provide supervision for
unattended children and assistance for others that require help to operate the brewer.
Drain Tube
Power Switch
Power Cord
Water Supply
NOTICE: The brewer is designed to operate with water pressures from 10 psig up to 100 psig.
requires the use of an external water filter such as Water Filter Kit P/N 250-00034. The filter mounts on the rear
surface of the brewer.
ENGLISH
Water and Power
Flare Washer
Water Inlet
Adapter (Auto-Fill ONLY)
Valve Cap (Pour-Over ONLY)
Grindmaster
3