Switching From The Disc Menu; Displaying The Disc Status For Dvd/Video Cd; Other Useful Features; Adjusting The Audio - Alpine IVA-D310 Manual De Operación

Switching from the disc menu

For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
Touch [MENU] or [TOP MENU] to display the
menu.
2
Select an item to confirm it.
See "If a menu screen appears" on pages 19-20.
Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD or of the currently
playing video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
Other Useful
Features

Adjusting the Audio

Press the Rotary encoder on the unit.
The display changes to the Audio Adjustment screen.
Display Example for Audio Adjustment Screen
Adjust the volume of the front and rear speakers by
touching [F] or [R].
Adjust the volume of the left and right speakers by
touching [L] or [R].
Determine your desired setting value by touching and
moving [ ].
Touches [ ], [ ] or [ON], [OFF] to adjust to your
preference.
• Touch [AUDIO MODE] on the SETUP selection screen to change to
the Audio Adjustment screen.
• Touching [CONTROL] will change to the main source screen.
Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Fader
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
Adjusting the Subwoofer Level
Touch [ ] or [ ] of SUBW. to adjust the subwoofer
output.
Setting range: 0 to 15
• The level adjustment becomes available when 0° or 180° is set in
"Subwoofer On and Off" (page 42).
Adjusting NAV. LEVEL
Touch [ ] or [ ] of NAV. to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• This adjustment becomes available when NAV.MIX is turned on in
"Setting the Navigation Interruption" (page 33).
• The setting navigation interruption is not displayed if an external
audio processor not compatible with NAV.MIX is connected.
23
-EN