Verifying Proper Installation (Windows 98/98 Se) - Belkin F5U220 Manual Del Usuario

Driver Installation
(8)
(9)
(10)
(11)
EN
(12)
(13)
(14)
Installation is now complete.

Verifying Proper Installation (Windows 98/98 SE)

Check the "Windows Device Manager" to verify that your PCI Card has been
properly installed.
(1)
(2)
(3)
The Device Manager list will now include two "NEC USB Open Host
Controller" entries, one "Belkin USB 2.0 Hi-Speed Host Controller" entry,
and two additional "USB Root Hub" entries.
6 6
After installation of the two USB 1.1 Host Controllers, Windows will
detect "PCI Universal Serial Bus." This is the USB 2.0 EHCI Host
controller.
The "Add New Hardware Wizard" dialog box will open. Click
"Next".
Select "Search for the best driver for your device" and click
"Next".
Check the "CD-ROM drives" box. Click "Next".
Windows will locate the driver for "Belkin USB 2.0 High Speed Host
Controller" Click "Next".
Windows will now install the Enhanced Host Controller driver. Click
"Finish".
After installation of the USB Host Controllers, Windows will detect
"USB Root Hub" and automatically install the required driver
support. This will repeat for each of the two USB OHCI Host
Controllers.
Right-click on my computer and select properties.
Select the Device Manager tab.
Click on the plus-sign (+) next to Universal Serial Bus controllers".