Maximum Input Level; Input Gain; Delay; Output Gain - Bose Professional ControlSpace SP-24 Guía De Instalación Y Funcionamiento

Installation and Operating Guide
Max Input Level
Select the maximum input level for both A and B inputs. There are three selectable values: 0 dBu, 6 dBu, and 18 dBu. Using
documentation for the audio source device, determine the maximum output level and select the corresponding values on the SP-24
sound processor. If the maximum input level for the source is higher than 18 dBu, either limit the output of the source using a
master output control or use an inline pad to reduce the maximum level to 18 dBu or less.
Max Input Level
18 dBu
6 dBu
0 dBu

Input Gain

Set the input gain for each input. Range of control: -60 dB to 12 dB; 0.5 dB increments.
Input Gain
InA InA xx.x dB
InB InB xx.x dB

Delay

Set the output delay independently for each output channel. Range of control: 0 ms to 170 ms; 0.5 ms increments.
Delay
Out1 Out1 xxx.x ms
Out2 xxx.x ms
Out2
Out3 Out3 xxx.x ms
Out4 Out4 xxx.x ms

Output Gain

Set the output gain independently for each channel. Range of control: -60 dB to 0 dB; 0.5 dB increments.
Output Gain
Out1 Out1 xx.x dB
Out2 Out2 xx.x dB
Out3 xx.x dB
Out3
Out4 Out4 xx.x dB

User Lockout

Locks the navigation buttons to prevent tampering with the settings. When Lockout is engaged, the current state of the controller is
fixed. User Lockout does not prevent access by the SP-24 Editor access via USB.
User Lockout
Press > to Lock
Page 28 Installation and Operating Guide
To set Max Input Level:
1. Navigate to Max Input Level in the Utility Menu.
2. Press .
3. Use to select the desired maximum input level.
4. Press SELECT/LOAD to save the setting.
5. Press to exit.
To set Input Gain:
1. Navigate to Input Gain in the Utility Menu.
2. Press to locate the desired input channel (InA or InB).
3. Press to select.
4. Use to set the input gain.
5. Press SELECT/LOAD to save the setting.
6. Press to exit.
To set Delay:
1. Navigate to Delay in the Utility Menu.
2. Press to locate the desired channel (Out1, Out2, Out3, Out4).
3. Press to select.
4. Use to set the delay.
5. Press SELECT/LOAD to save the setting.
6. Press to exit.
To set Output Gain:
1. Navigate to Output Gain in the Utility Menu.
2. Press to locate the desired output channel (Out1, Out2, Out3, Out4).
3. Press to select.
4. Use to set the output gain.
5. Press SELECT/LOAD to save the setting.
6. Press to exit.
To lock:
1. Navigate to User Lockout in the Utility Menu.
2. Press .
3. Select to engage lockout or press
4. Sound processor will automatically return to a locked Home Screen.
to abort.
pro.Bose.com
English