Boston Scientific LATITUDE 6280 Manual Del Paciente página 25

• If the LATITUDE indicator is not lit, check that
both ends of the AC adapter are plugged in
firmly. Check if the light on the AC adapter is lit.
3. Plug one end of the Communicator telephone
cord (included) into the jack labeled
4. Plug the other end of the cord into the telephone
jack on the wall.
Note: If you have DSL internet service, you may
need to use a DSL filter between the telephone
wall jack and the Communicator. Refer to "DSL
Internet Service" on page 71.
5. Optional: To use a telephone with this wall jack,
you may plug your telephone into the jack labeled
.
Note: Your Communicator and a telephone can
share the same telephone wall jack. However,
they cannot be used at the same time.
6. When the Heart button flashes, press it.
• Your Communicator's wave lights will flash
green in sequence and repeat for several
minutes as shown in "Using the Heart Button"
on page 37.
• If you have previously completed initial setup,
the Heart button will not flash at this point.
LATITUDE Communicator Patient Manual
TM
.
21